Gwyddion – Free SPM (AFM, SNOM/NSOM, STM, MFM, …) data analysis software

arithmetic

arithmetic — Arithmetic opetations on data fields

Functions

void	gwy_data_field_sum_fields ()
void	gwy_data_field_subtract_fields ()
void	gwy_data_field_divide_fields ()
void	gwy_data_field_multiply_fields ()
void	gwy_data_field_min_of_fields ()
void	gwy_data_field_max_of_fields ()
void	gwy_data_field_hypot_of_fields ()
void	gwy_data_field_linear_combination ()
GwyDataCompatibilityFlags	gwy_data_field_check_compatibility ()
GwyDataCompatibilityFlags	gwy_data_line_check_compatibility ()
GwyDataCompatibilityFlags	gwy_brick_check_compatibility ()
GwyDataCompatibilityFlags	gwy_lawn_check_compatibility ()
GwyDataCompatibilityFlags	gwy_data_field_check_compatibility_with_brick_xy ()
GwyDataCompatibilityFlags	gwy_data_line_check_compatibility_with_brick_z ()
GwyDataCompatibilityFlags	gwy_data_field_check_compatibility_with_lawn ()
GwyDataField *	gwy_data_field_extend ()

Includes

#include <libprocess/gwyprocess.h>

Description

Data arithmetic functions perform simple operations combining several data fields. Their sizes have to be size-compatible, i.e. gwy_data_field_check_compatibility(operand1, operand2, GWY_DATA_COMPATIBILITY_RES) must pass and the same must hold for the data field to store the result to.

Functions gwy_data_field_check_compatibility(), gwy_data_line_check_compatibility() and gwy_brick_check_compatibility() simplify testing compatibility of data fields, lines and bricks, respectively.

Functions

gwy_data_field_sum_fields ()

void
gwy_data_field_sum_fields (GwyDataField *result,
                           GwyDataField *operand1,
                           GwyDataField *operand2);

Sums two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_subtract_fields ()

void
gwy_data_field_subtract_fields (GwyDataField *result,
                                GwyDataField *operand1,
                                GwyDataField *operand2);

Subtracts one data field from another.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_divide_fields ()

void
gwy_data_field_divide_fields (GwyDataField *result,
                              GwyDataField *operand1,
                              GwyDataField *operand2);

Divides one data field with another.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_multiply_fields ()

void
gwy_data_field_multiply_fields (GwyDataField *result,
                                GwyDataField *operand1,
                                GwyDataField *operand2);

Multiplies two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_min_of_fields ()

void
gwy_data_field_min_of_fields (GwyDataField *result,
                              GwyDataField *operand1,
                              GwyDataField *operand2);

Finds point-wise maxima of two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_max_of_fields ()

void
gwy_data_field_max_of_fields (GwyDataField *result,
                              GwyDataField *operand1,
                              GwyDataField *operand2);

Finds point-wise minima of two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

gwy_data_field_hypot_of_fields ()

void
gwy_data_field_hypot_of_fields (GwyDataField *result,
                                GwyDataField *operand1,
                                GwyDataField *operand2);

Finds point-wise hypotenuse of two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
operand1	First data field operand.
operand2	Second data field operand.

Since: 2.31

gwy_data_field_linear_combination ()

void
gwy_data_field_linear_combination (GwyDataField *result,
                                   gdouble coeff1,
                                   GwyDataField *operand1,
                                   gdouble coeff2,
                                   GwyDataField *operand2,
                                   gdouble constant);

Computes point-wise general linear combination of two data fields.

Parameters

result	A data field to put the result to. May be one of `operand1` , `operand2` .
constant	Constant term to add to the result.
operand1	First data field operand.
coeff1	Factor to multiply the first operand with.
operand2	Second data field operand.
coeff2	Factor to multiply the second operand with.

Since: 2.59

gwy_data_field_check_compatibility ()

GwyDataCompatibilityFlags
gwy_data_field_check_compatibility (GwyDataField *data_field1,
                                    GwyDataField *data_field2,
                                    GwyDataCompatibilityFlags check);

Checks whether two data fields are compatible.

Parameters

data_field1	A data field.
data_field2	Another data field.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if data fields are not compatible.

gwy_data_line_check_compatibility ()

GwyDataCompatibilityFlags
gwy_data_line_check_compatibility (GwyDataLine *data_line1,
                                   GwyDataLine *data_line2,
                                   GwyDataCompatibilityFlags check);

Checks whether two data lines are compatible.

Parameters

data_line1	A data line.
data_line2	Another data line.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if data lines are not compatible.

gwy_brick_check_compatibility ()

GwyDataCompatibilityFlags
gwy_brick_check_compatibility (GwyBrick *brick1,
                               GwyBrick *brick2,
                               GwyDataCompatibilityFlags check);

Checks whether two data bricks are compatible.

Real dimensions are checked without regard to calibration. Calibrations are considered compatible if either both exist and are identical or none exists.

Parameters

brick1	A data brick.
brick2	Another data brick.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if bricks are not compatible.

Since: 2.51

gwy_lawn_check_compatibility ()

GwyDataCompatibilityFlags
gwy_lawn_check_compatibility (GwyLawn *lawn1,
                              GwyLawn *lawn2,
                              GwyDataCompatibilityFlags check);

Checks whether two data lawns are compatible.

Dimensions are checked only in the plane. To check if the curve lengths match, use the GWY_DATA_COMPATIBILITY_CURVELEN flag. Use GWY_DATA_COMPATIBILITY_NCURVES to check if the two lawns have the same number of curves.

Parameters

lawn1	A data lawn.
lawn2	Another data lawn.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if lawns are not compatible.

Since: 2.60

gwy_data_field_check_compatibility_with_brick_xy ()

GwyDataCompatibilityFlags
gwy_data_field_check_compatibility_with_brick_xy
                               (GwyDataField *data_field,
                                GwyBrick *brick,
                                GwyDataCompatibilityFlags check);

Checks whether a data field is compatible with brick XY-planes.

Parameters

data_field	A two-dimensional data field.
brick	A three-dimensional data brick.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if the data objects are not compatible.

Since: 2.51

gwy_data_line_check_compatibility_with_brick_z ()

GwyDataCompatibilityFlags
gwy_data_line_check_compatibility_with_brick_z
                               (GwyDataLine *data_line,
                                GwyBrick *brick,
                                GwyDataCompatibilityFlags check);

Checks whether a data line is compatible with brick Z-profiles.

If check includes GWY_DATA_COMPATIBILITY_REAL or GWY_DATA_COMPATIBILITY_LATERAL but not GWY_DATA_COMPATIBILITY_AXISCAL, data_line is simply compared to brick in the Z direction.

If you include GWY_DATA_COMPATIBILITY_AXISCAL and brick has a Z-calibration data line, then the value range and units of this data line are compared to data_line . This may not be very useful.

Parameters

data_line	A one-dimensional data line.
brick	A three-dimensional data brick.
check	The compatibility tests to perform.

Returns

Zero if all tested properties are compatible. Flags corresponding to failed tests if the data objects are not compatible.

Since: 2.51

gwy_data_field_check_compatibility_with_lawn ()

GwyDataCompatibilityFlags
gwy_data_field_check_compatibility_with_lawn
                               (GwyDataField *data_field,
                                GwyLawn *lawn,
                                GwyDataCompatibilityFlags check);

gwy_data_field_extend ()

GwyDataField *
gwy_data_field_extend (GwyDataField *data_field,
                       guint left,
                       guint right,
                       guint up,
                       guint down,
                       GwyExteriorType exterior,
                       gdouble fill_value,
                       gboolean keep_offsets);

Creates a new data field by extending another data field using the specified method of exterior handling.

Parameters

data_field	A two-dimensional data field.
left	Number of pixels to extend to the left (towards lower column indices).
right	Number of pixels to extend to the right (towards higher column indices).
up	Number of pixels to extend up (towards lower row indices).
down	Number of pixels to extend down (towards higher row indices).
exterior	Exterior pixels handling.
fill_value	The value to use with `GWY_EXTERIOR_FIXED_VALUE` exterior.
keep_offsets	`TRUE` to set the X and Y offsets of the new field using `field` offsets. `FALSE` to set offsets of the new field to zeroes.

Returns

A newly created data field.

Since: 2.36